Chrysler Crossfire SRT6 Instruction Manual Download Page 72 | Manualshive

Page: 72 / 280

Chrysler Crossfire SRT6 Instruction Manual Download Page 72

To prevent possible damage, close the hood by dropping
it from approximately 12 inches (30 cm).

WARNING!

If the hood is not fully latched, it could fly up when
the vehicle is moving, and block your forward vi-
sion. You could have a collision. Be sure all hood
latches are fully latched before driving.

INTERIOR LIGHTS

A two-position mode selector switch controls the interior
lights located in the overhead console.

The AUTO mode turns the lights on when a door is open
or ajar, or when locking or unlocking the vehicle. AUTO
mode also has a “fade to off” feature. When the doors are
closed or locked, they gradually “fade” off.

The OFF position turns off the interior lights feature.

72

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
70
71
72
73
74
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments