Home
/
Chrysler
/
Crossfire SRT6
/
Instruction Manual

Chrysler Crossfire SRT6, Instruction Manual, Page: 139 / 280

Share

Page: 139 / 280

Chrysler Crossfire SRT6 Instruction Manual Download Page 139

When parking on a hill, you must set the parking brake

before

placing the gear selector in PARK. If you don’t, the

load on the transmission locking mechanism may make it
difficult to move the selector out of PARK. As an added
precaution, turn the front wheels toward the curb on a
downhill grade and away from the curb on an uphill
grade.

The parking brake should always be applied when the
driver is not in the vehicle.

WARNING!

Be sure the parking brake is fully disengaged before
driving; failure to do so can lead to brake failure and
an accident.

WARNING!

Do not leave children unattended in a vehicle. A
child could be injured, or could injure others, if left
unattended.

BRAKE SYSTEM

Your vehicle is equipped with power brakes as standard
equipment. In the event power assist is lost for any
reason (for example, repeated brake applications with the
engine off), the brakes will still function. The effort
required to brake the vehicle will be much greater than
that required with the power system operating.

If either the front or rear hydraulic system loses normal
capability, the remaining system will still function with
some loss of overall braking effectiveness. This will be
evident by increased pedal travel during application,
greater pedal force required to slow or stop, and activa-
tion of the brake warning light during brake use.

Brake Assist System (BAS)

The BAS is designed to maximize the vehicle’s braking
capability during emergency braking maneuvers. Maxi-
mum power boost is applied to the brakes more quickly
in emergency braking conditions. This can help reduce
braking distances relative to what ordinary driving and
braking style might do.

The BAS complements the antilock brake system (ABS).
Applying the brakes very quickly results in maximum

STARTING AND OPERATING

139

5

«
...
137
138
139
140
141
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments