Chrysler Crossfire SRT6 Instruction Manual Download Page 20

Page: 20 / 280

Opening the Decklid During Top Operation

The decklid can be opened during the top operation by
following this procedure.

CAUTION!

It is possible for the decklid to contact the tonneau
cover if opened during the top operation.

CAUTION!

The tops hydraulic pressure will also be released
during this procedure which will allow the top and
tonneau cover to slowly collapse.

1. Turn the ignition “ON”.

2. Push down and hold the convertible top switch.

3. Turn the ignition “OFF’ and continue to push down on
the convertible top switch for 5 seconds.

4. After five seconds the decklid will be released and can
be opened.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Crossfire SRT6

























































































































































































































































































Search results

Summary of Contents for Crossfire SRT6

Reviews:

Chrysler Crossfire SRT6, Instruction Manual, Page: 20 / 280

Search results

Summary of Contents for Crossfire SRT6

Reviews: