Chrysler Crossfire SRT6 Instruction Manual Download Page 21 | Manualshive

Page: 21 / 280

Chrysler Crossfire SRT6 Instruction Manual Download Page 21

POWER WINDOWS

The power window switches are located in the console.

To operate, turn the key in the ignition switch to the ACC
or ON/RUN position. Press the switch in to the resis-
tance point to open; release the switch when the window
is in the desired position.

For express opening of windows, press the switch past
the resistance point and release; the window lowers to
the fully open position. To interrupt the procedure,
briefly press the switch again and release.

When closing the windows, be sure that there is no
danger of anyone being harmed by the closing proce-
dure.

WARNING!

When leaving the vehicle, always remove the key
from the ignition switch, and lock the vehicle. Do
not leave children unattended in the vehicle, or with
access to an unlocked vehicle. Unsupervised use of
vehicle equipment can cause serious personal injury.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

21

2

«
...
19
20
21
22
23
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments