Chrysler Crossfire SRT6 Instruction Manual Download Page 87 | Manualshive

Page: 87 / 280

Chrysler Crossfire SRT6 Instruction Manual Download Page 87

To accelerate and set a speed, lift the lever up. Lift and
hold the lever to accelerate, or lift and release to set a
speed. To decelerate and set a speed, press the lever
down. Press down and hold the lever to decelerate, or
press down and release to set a speed.

WARNING!

Leaving the electronic speed control system on when
not in use is dangerous. You could accidentally set
the system or cause it to go faster than you want. You
could lose control and have an accident. Always
leave the system OFF when you are not using it.

To Vary The Speed Setting

If a set speed needs to be adjusted slightly, lift up or hold
down the speed control lever briefly until the desired
speed is reached. A single tap on the lever up or down
will change the speed in 0.6 mph (1 km/h) increments.
When the lever is released, the newly set speed remains.

To increase the speed for passing, use the accelerator.
After the accelerator is released, the previously set speed
will resume automatically.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

87

3

«
...
85
86
87
88
89
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments