Chrysler Crossfire SRT6 Instruction Manual Download Page 11 | Manualshive

Page: 11 / 280

Chrysler Crossfire SRT6 Instruction Manual Download Page 11

GLOVE COMPARTMENT LOCK

The glove compartment can be locked by turning the key
straight up to the vertical or right position, and then
removing the key.

To unlock the glove compartment, turn the key to the
horizontal or left position, and then remove the key.

DOOR LOCKS

The vehicle doors can be locked when the doors are
closed by either manually pressing the button down at
the top of the door panel, pressing and releasing the
bottom portion of the central locking switch located in
the console, or by pressing and releasing the Lock
transmit button on the key fob. Also, by turning the key
clockwise in the driver’s door, both doors, liftgate/
decklid, fuel filler door, and center console (roadster
only) will lock.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

11

2

«
...
9
10
11
12
13
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments