Chrysler Crossfire SRT6 Instruction Manual Download Page 38 | Manualshive

Page: 38 / 280

Chrysler Crossfire SRT6 Instruction Manual Download Page 38

To Shut Off the Passenger Airbag:

•

Place the ignition key in the on/off switch, turn the
key clockwise, and remove the key from the switch.
This will shut off the passenger front airbag.

•

The air bag will remain off until the switch is turned
back to the ON position.

•

The switch does NOT turn off the side airbag.

To Turn On the Passenger Airbag:

•

Place the ignition key in the on/off switch, turn the
key counterclockwise, and remove the key from the
switch. This will turn on the passenger airbag. The
Passenger Airbag Off light on the console will turn off,
or will not be illuminated when the ignition is turned
to the ON position.

WARNING!

The airbag may malfunction and serious injury
could result if key is left in the airbag shut off
switch. Always remove the key.

38

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
36
37
38
39
40
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments