Chrysler Crossfire SRT6 Instruction Manual Download Page 230

Page: 230 / 280

4. Realign the two tabs and push the light in until it
engages into the lock.

Tail, Stop, Back Up and Turn Signal Lights

1. Open the rear liftgate / decklid and remove the access
door in the trim panel.

2. Twist the bulb socket counterclockwise and pull out.

3. Replace the light and return to open socket, turn
clockwise until it stops.

4. Replace the access door in the trim panel.

License Plate Light

1. Remove the two lens assembly mounting screws.

2. Pull the bulb out of the socket.

3. Replace the bulb and reattach the lens assembly.

4. Align and resecure the two lens assembly mounting
screws.

NOTE:

Be sure not to over-torque the mounting screws

or permanent damage to the lens may occur.

230

MAINTAINING YOUR VEHICLE

Summary of Contents for Crossfire SRT6

























































































































































































































































































Search results

Summary of Contents for Crossfire SRT6

Reviews:

Chrysler Crossfire SRT6, Instruction Manual, Page: 230 / 280

Search results

Summary of Contents for Crossfire SRT6

Reviews: