Chrysler Crossfire SRT6 Instruction Manual Download Page 33 | Manualshive

Page: 33 / 280

Chrysler Crossfire SRT6 Instruction Manual Download Page 33

•

The knee impact bolster helps protect the knees and
working with the seat belts, position you for the best
interaction with the airbags.

If a Deployment Occurs

WARNING!

Deployed airbags can’t protect you in another colli-
sion. Have the airbags replaced by an authorized
dealer as soon as possible.

The airbag system is designed to deploy when the impact
sensors detect a moderate-to-severe frontal collision, to
help restrain the driver and passenger, and then to
immediately deflate.

NOTE:

A frontal collision that is not severe enough to

need airbag protection will not activate the system. This
does not mean something is wrong with the airbag
system.

If you do have a collision which deploys the airbags, any
or all of the following may occur:

•

The nylon airbag material may sometimes cause abra-
sions and/or skin reddening to the driver and passen-
ger as the airbags deploy and unfold. The abrasions
are similar to friction rope burns or those you might
get sliding along a carpet or gymnasium floor. They
are not caused by contact with chemicals. They are not
permanent and normally heal quickly. However, if you
haven’t healed significantly within a few days, or if
you have any blistering, see your doctor immediately.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

33

2

«
...
31
32
33
34
35
...
»

Summary of Contents for Crossfire SRT6

























































































































































































































































































Reviews:

No comments