Chrysler Crossfire SRT6 Instruction Manual Download Page 57

Page: 57 / 280

NOTE:

Once the top is lowered and the audible signal

is heard, you can continue to push the convertible top
switch down or push it within 2 seconds to raise the
windows.

The windows can also be closed/opened later using the
power window switches.

CAUTION!

To prevent mildew, the convertible top must be dry
before lowering it into the storage compartment.

Do not lower a frozen convertible top until thawed
and dry. Doing so may result in damage not covered
by the DaimlerChrysler Limited Warranty.

CAUTION!

Do not place anything on the tonneau cover.

The tonneau cover must never be used as a seating
area.

To Raise The Top:

1. Make sure the rear cargo compartment divider is still
secured in the vertical position.

2. Make sure the decklid is closed.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Crossfire SRT6

























































































































































































































































































Search results

Summary of Contents for Crossfire SRT6

Reviews:

Related manuals for Crossfire SRT6

Brands by name

Popular brands

Chrysler Crossfire SRT6, Instruction Manual

Search results

Summary of Contents for Crossfire SRT6

Reviews:

Related manuals for Crossfire SRT6

Brands by name

Popular brands