Home
/
Chrysler
/
2010 Sebring
/
Owner'S Manual

Chrysler 2010 Sebring, Owner'S Manual, Page: 103 / 456

Share

Page: 103 / 456

Chrysler 2010 Sebring Owner'S Manual Download Page 103

For comfort the Active Head Restraints can be tilted
forward and backward. To tilt the head restraint closer to
the back of your head, pull outward on the bottom of the
head restraint. Push rearward on the bottom of the head
restraint to move the head restraint away from your
head.

NOTE:

•

The head restraints should only be removed by quali-
fied technicians, for service purposes only. If either of
the head restraints require removal, see your autho-
rized dealer.

Active Head Restraint (Normal Position)

Active Head Restraint (Tilted)

102

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
101
102
103
104
105
...
»

Summary of Contents for 2010 Sebring









































































































































































































































































































































































































































































Reviews:

No comments