Christie Solaria CP2210, User Manual

Page: 44 / 164

4-12 CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Section 4: Adjusting the Image
4.11.9 Verify 3D Cinema Content
1. Put on a pair of 3D glasses.
2. Play the 3D content.
3. Verify the left and right eye display correctly.
4. Put the 3D glasses on upside down.
5. If the image is reversed:
a. Tap Menu > Channel Setup on the projector Touch Pad Controller (TPC).
b. Select a 3D channel in the Channel Name list.
c. Select Inverted in the 3D Sync Polarity list.
4.11.10 3D Troubleshooting
Reversed 3D Effect (Pseudo 3D)
1. Put your 3D glasses on upside down.
2. If the image is reversed:
a. Tap Menu > Channel Setup on the projector Touch Pad Controller (TPC).
b. Select a 3D channel in the Channel Name list.
c. Select Inverted or True in the 3D Sync Polarity list.
Image Breakup
1. Tap Menu > Channel Setup .
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Lower the Dark Time field value.
Image is Too Dark
The lamp power for 3D content is typically twice as high as for 2D content except when you are using a RealD
XL device.
1. Tap
Menu > Advanced Setup > Lamp Power / LiteLOC™ Setup.
2. Increase the value in the Power % field.
No 3D Effect
1. Tap Menu > Channel Setup .
2. Select a 3D channel in the Channel Name list.
3. Tap 3D Control in the left pane.
4. Verify Enable 3D is selected.