Christie Solaria CP2210, User Manual

Page: 83 / 164

Section 6: Projector Menus
CP2210 User Manual 6-29
020-100410-07 Rev. 1 (01-2012)
6.14.4 ILS File Setup Window
To prevent the projection lens and the Motorized Auxiliary Lens Mount
(MALM) colliding, move the MALM to the out position before calibrating the lens or resetting
the MALM. When performing a lens calibration keep your fingers away from moving parts.
Use the ILS File Setup window to modify the Intelligent Lens System (ILS) settings in an ILS file. Tap Menu
> Advanced Setup > ILS File Setup
The ILS File Setup window is not available if you have not selected the ILS Installed option in the Lens Setup
window. Changes made to settings are applied to all channels that use the ILS file. Tap once to increase or
decrease the focus, offset, or zoom by a single increment. Press and hold a button to increase or decrease the
focus, offset, or zoom by multiple increments. If you adjust the focus, offset, or zoom of the lens mount
manually, the new settings are not saved in the ILS file
.
Table 6.16 ILS File Setup A
Auto
LampLOC™ Progress Bar
Shows the current LampLOC ™ procedure completion status.
Cancel Auto Cancels the LampLOC calibration.
Control Description
Focus Adjusts the focus.
Zoom Adjusts the zoom.
Offset Adjusts the offset.
Quick Reset Resets the lens to the mechanical center before moving back to the original position.
MALM Reset Resets the position of the MALM to the mechanical reference point.
Control Description
WARNING
Figure 6-22 ILS File Setup Window