Christie Solaria CP2210, User Manual

Page: 15 / 164

CP2210 User Manual 2-1
020-100410-07 Rev. 1 (01-2012)
2 Installation and Setup
This section provides information and procedures for positioning and installing the projector. You need these
tools to install the CP2210 projector:
• 19 mm wrench
• Protective safety clothing (if you are replacing the lamp)
• Lamp
2.1 What’s In the Box?
These items are included with your CP2210 projector:
• Projector with Touch Panel Controller
• User Manual
• Warranty Card
• Web Registration Form
• Power Cord
NOTE:
Lamp and lens supplied separately.
2.2 Projector Components
The CP2210 projector includes these components:
2.2.1 Air Filter Cover and Air Filter
Located directly behind the air filter cover is a field replaceable air filter. The air filter is responsible for
filtering the intake air before it begins circulating in the front compartment to cool the main electronics.
2.2.2 Douser
For most instances, use the douser control buttons on the TPC to blank the display for instant picture muting.
Closing the douser rotates a shutter blade in front of the illumination system and reduces lamp power to
conserve lamp life.
2.2.3 Adjustable Feet
For many cinema installations, the projector is inclined slightly forward to match screen tilt and to minimize
the amount of vertical offset required. Turn the adjustable feet to increase or decrease the projector height as
needed for proper leveling and/or slight tilt. See
2.4 Adjust Tilt and Level the Projector for details on how to
adjust the feet and how to properly secure the projector.
2.2.4 Lamp Door and Lamps
Located on the back of the projector is the lamp access door designed with a mid-security lock. The lamp door
must remain closed and locked for all normal operation. Lamp replacement should only be performed by
qualified technicians.