Christie Solaria CP2210, User Manual

Page: 73 / 164

Section 6: Projector Menus
CP2210 User Manual 6-19
020-100410-07 Rev. 1 (01-2012)
6.13.1 Config 1 Window
Use the Channel Setup: Config 1 window to change the channel configuration settings.
Table 6.8 Config 1 Window
Control Description
1: Icon The icon associated with the channel.
2: Input The location or connection for the current input.
3: Data Format The source type (8-10-12 bit) and whether or not it is packed.
4: Source File The resolution and aspect ratio of the incoming source. To view a list of available sources,
see
6.14.6 Source File Setup Window, on page 6-31 .
5: Screen File The display area, masking, cropping and lens for the current input.
6: Use PCF Selects a pre-defined Projector Configuration File (PCF) for the input and prevents Channel
adjustments.
7: PCF The PCF file.
8: Lamp File The lamp configuration associated with the channel. Click Launch Dialog to edit the lamp file
settings. Any changes made to the Lamp File settings are applied to all channels that use this lamp
file.
9: ILS File The ILS configuration associated with the channel. Click Launch Dialog to edit the ILS file settings.
Any changes made to the ILS File settings are applied to all channels that use this ILS file.
10: Auxiliary Lens
Indicates if the channel uses an anamorphic lens.
Figure 6-13 Channel Setup: Config 1 Window
1
2
3
4
5
6
7
8
10
9