Christie Solaria CP2210, User Manual

Page: 13 / 164

Section 1: Introduction
CP2210 User Manual 1-3
020-100410-07 Rev. 1 (01-2012)
may not be limited to a polycarbonate face shield, protective gloves, and a quilted ballistic nylon jacket or a
welder’s jacket.
NOTE:
Christie’s protective clothing recommendations are subject to change. Any local or
federal specifications take precedence over Christie recommendations.
Cool the Lamp Completely
Lamp may explode causing bodily harm or death. Always wear protective
clothing whenever lamp door is open or while handling lamp. Ensure those within the vicinity
of the projector are also suited with protective clothing. Never attempt to access the lamp
while the lamp is ON. Wait at least 10 minutes after the lamp turns OFF before powering
down, disconnecting from AC and opening the lamp door.
1.3 Contact Your Dealer
If you encounter a problem with your Christie projector, contact your dealer. To assist with the servicing of
your projector, enter the information in the tables and keep this information with your records.
* The serial number can be found on the license label located on the front panel.
Table 1.1 Purchase Record
Dealer:
Dealer or Christie Sales/Service Contact Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date:
Table 1.2 Ethernet Settings
Default Gateway
Projector IP Address
Subnet Mask
DANGER