Christie Solaria CP2210, User Manual

Page: 74 / 164

6-20 CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
Section 6: Projector Menus
6.13.2 Config 2 Window
Use the Channel Setup: Config 2 window to change the color settings of a channel.
Table 6.9 Config 2 Window
*
NOTE
: Components marked with an asterisk (*) are part of pre-defined PCFs (Projector Configuration Files) that controls image
processing for a given source. When you select
Use PCF
, these options are not available.
Control Description
1: Measured Color The Measured Color Gamut Data (MCGD) file to use as a reference for calculating target color
processing.
2: Target Color* The Target Color Gamut Data (TCGD) value.
3: Color Space* The method of color decoding for the current source. The default is YCbCr for all DVI sources. The
default for all cinema sources is Unity RGB.
4: Gamma* The gamma correction required for the proper tonal range of the source material.
5: LUT_CLUT* Applies a 3D color cube for increased color accuracy.
6: Scan Type The video scan type. The default is Progressive .
7: Automatic Scan
Type Detection Automatically performs scan type detection. This feature is supported for PIB inputs only.
8: LD Bypass Bypasses the link decrypter. Select this option only if Marriage is broken and the content being displayed
is not CineLink 2 encrypted.
Figure 6-14 Channel Setup: Config 2 Window
1
2
3
4
5
6
7
8