6-8
Matrix StIM/SIM Setup Guide
020-100397-02 Rev. 1 (11-2012)
Section 6: Specifications
DVI-I – DIGITAL
Input Characteristics
meets DVI spec
DVI Cable Length
5m
Single Link DVI Pixel Rate
25-165 MPix/sec
NOTE:
Pixel rates above 150 MHz
require DIPC
Dual Link DVI pixel rate
165- 330 MPix/sec
NOTE:
Pixel rates above 150 MHz
require DIPC
EDID
Supported
HDCP (High Speed Digital Content Pro-
tection)
Supported
RS-232/RS-422 SERIAL INPUT
Connector Type
2 male DB9 (RS-232 OUT, GPIO)
2 female DB9 (RS-232 IN, RS-422 IN)
NETWORK CONTROL
Ethernet
Meets DVI spec
Maximum Baud Rate
1 RJ45 connector
REMOTE CONTROL
Type
Low Frequency IR with wired ability
Range
30 Meters
Laser Pointer
Included
Battery Type (2 Required)
AA, 1.5V Alkaline
WIRED CONTROL
Connector Type
XLR
Input Levels
High: 2.2V min.
Low: 0.9V max.
Power: 500mA @ 5V
Summary of Contents for Matrix SIM
