Christie Matrix SIM, Setup Manual

Page: 10 / 60

1-2 Matrix StIM/SIM Setup Guide
020-100397-02 Rev. 1 (11-2012)
Section 1: Introduction
1.2 Purchase Record and Service Contacts
If a problem is encountered with any part of the projector, contact your dealer. Usually servicing is performed
on site. If you have purchased the projector, fill out the information below and keep with your records.
* The serial number can be found on the license label located on the back of the projector.
1.3 Key Features
• Native WUXGA, 1920 x 1200 resolution
• 10-bit image processing module
• Display of RGB, NTSC, PAL, and SECAM video inputs and HDTV formats
• Picture-in-Picture display
• Edge Blending ability via software for seamless displays
• Dual frequency IR sensor for use with standard IR remote and optional long-range dual frequency remote
• Memory for up to 99 custom “channels” (source setups)
• Intuitive on-screen menu system
• Built-in GPIO port to enable active control of external devices
• LED display for projector status monitoring
• Multiple control options including RS-232 and RS-422
• On-board ChristieNET

software
• Universal AC input 100-240 VAC, 50/60Hz
• Dual Image Processing Card (DIPC)
• InfraRGB mode interleaves 2 independent (RGB and IR) inputs
Dealer:
Dealer or Christie Sales/Service Contact Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date:
Default Gateway
DNS Server
Projector IP Address
Subnet Mask