5-2
Matrix StIM/SIM Setup Guide
020-100397-02 Rev. 1 (11-2012)
Section 5: Troubleshooting
System Errors
Shows that a serious malfunction exists and must be reported to the manufacturer as soon as possible. The
projector will no longer operate. Reset the projector by powering it off and on again, cooling when necessary.
5.2.1 LED Status Display On the Projector
Projector status is indicated by a single 3-color LED adjacent to a 2-digit status display. A solid red LED
indicates a system error and the corresponding error code indicates what the error is. Press
E
XIT
twice to
acknowledge and clear the error code.
LED Status
2-Character Display
Description
Solid yellow
Rotating Warming
up
PR
(Programming TI)
FS
(Failsafe mode)
EM in fail safe mode, refer to the Visual Envi-
ronments Projector
Software Upgrade instruction sheet
(P/N: 020-100443-XX)
— —, static
Standby mode
— —, moving up and down
Brief cool down period
Solid green
•
BO
(Booting) when power first applied
•
B1
(Boot phase 1) starting main script
•
B2
(Boot phase 2) starting projector code
•
B3
(Boot phase 3) about to initialize connec-
tions
When powering on (booting) the projector, the
LED will go through phases.
Powered ON
Normal operations
EM ON
•
SH
(Shutter Mode) active EM
Flashing green
Keypad command sent - Command received
Solid Red
System error – see 5.2.2 Error Codes
Flashing red
Key press error
Wrong protocol sent
blank
— —
Waiting to establish a connection with PHM
blank
Rotating
Initializing hardware and connecting to PHM
Summary of Contents for Matrix SIM
