Christie Matrix SIM, Setup Manual

Page: 36 / 60

3-16 Matrix StIM/SIM Setup Guide
020-100397-02 Rev. 1 (11-2012)
Section 3: Setup
3.4.3 Adjust the IR Brightness Only
The InfraRGB menu is used to set when and how IR is activated for projector pixels. If the simulated IR does
not look quite right when you have night vision goggles on, you can change the brightness of the IR without
affecting the brightness of the RGB by using this menu.
1. From the
InfraRGB menu, choose InfraRGB Targets and Adjustments .
2. Choose InfraRGB Preset
,
and then choose a preset option.
3. Press
M
ENU
to exit.
3.4.4 Change the Brightness Levels of the Light Modes
NOTE:
To reset the modes to their default values, from the Configure Lighting Mode menu, choose Reset
Current Lighting Mode to Default or Reset All Lighting Modes to Default.
1. From the InfraRGB menu, choose Configure Lighting Mode .
2. Choose the desired mode from the Selected Lighting Mode list.
3. If you want to base the settings on another mode, choose Copy Lighting Mode From
,
and select another
mode from the list.
4. Change the brightness factors: RGB Brightness and IR Brightness .
5. Press
M
ENU
to exit.