4-4
Matrix StIM/SIM Setup Guide
020-100397-02 Rev. 1 (11-2012)
Section 4: Basic Operation
Function Key
Press
F
UNC
followed by
H
ELP
to disable the
Keystone
,
Edge Blending
and
Brightness Uniformity
settings
without changing the settings associated with them.
In a Numeric Field in a Menu:
Use
F
UNC
to enter a negative number.
In a Text Field:
• Press
F
UNC
followed by the
U
P
arrow key or
D
OWN
arrow key to convert between capital and lower case
letters.
• Press
F
UNC
followed by the
L
EFT
arrow key or
R
IGHT
arrow key to insert or delete a character.
• Press
F
UNC
followed by
E
NTER
to delete all characters.
Within a Presentation:
Press
F
UNC
followed by 2 numeric numbers to enable
a specific color or colors in the display (see right).
For example,
F
UNC
+6+1
will display only red, and
F
UNC
+6+2
will display
green data. Eliminating one or more colors can help with certain diagnostics
and setups, such as when accurately overlaying one image on top of another
from stacked projectors.
NOTE:
Color enabling can also be implemented from
numerous locations within the menu system.
Enter
Press
E
NTER
to select a highlighted item, to toggle a check box, or to accept a parameter adjustment and return
to the previous menu or image.
Exit
Press
E
XIT
to return to the previous level, such as the previous menu.
NOTE:
Exit
does not save changes within
text editing boxes (including number editing of a slide bar value) or within pull-down lists. It acts as a
“cancel” in these cases.
Projector
Press
P
ROJ
to access a specific projector within a group of projectors or to confirm if the local projector is
listening. The number in the “Enter Number” window indicates which projector is currently listening to
commands and will match the projector address defined in the
Configuration > Communications
menu. The
P
ROJ
check box (read-only) shows whether or not the projector physically connected to a keypad is listening to
commands from that keypad. A checkmark means that connected projector is listening; if there is no
checkmark, you are communicating with a different projector.To control a specific projector with the keypad,
press
P
ROJ
and then enter the 3-digit number assigned to the projector you want to use. If you switch to a
projector other than the one you are currently using, the checkmark will disappear. To broadcast to multiple
projectors, press
P
ROJ
and then
P
ROJ
again without entering a projector number. Keypad commands will then
affect all projectors present.
NOTE:
There is no method of controlling a group of projectors within the same
wired configuration using the wired keypad exclusively, since there is only one wired protocol available
.
Arrow Keys
Use the
L
EFT
/R
IGHT
arrow keys to change a slide bar value or to select a different option within a pull-down list
without having to first scroll through options or navigate within a menu, pull-down list or text box.
Summary of Contents for Matrix SIM
