![background image](http://html.mh-extra.com/html/corvi/spot-3q/spot-3q_quick-start-manual_2670012001.webp)
1/2
Safety standard
i. Do not attempt to disassemble, repair or perform any unauthorised modifications on the luminaire
ii. Do not handle with wet hands, immerse in liquids or expose to water and rain, electric shock or fire may result
iii. Keep out of reach from children
iv. Do not operate luminaire in presence of flammable gas or vapors
v. Do not use product if it emits smoke or a strange odour; disconnect power source immediately to avoid personal injury
and contact place of purchase
vi. Do not intentionally stare or gaze at LED lumianire for prolonged periods while the luminaire is on
vii. Do not use or leave luminaire in conditions of extreme heat, severe cold or high humidity
viii. Risk Of Fire or electric shock. Led retrofit installation must be done by a qualified electrician and all safety instructions
must be followed to avoid a risk of injury and property damage. Do not disassemble this product and replace any LED or
other internal components. When the light source reaches its end of life the whole luminaire shall be replaced
ix. Remove any cracked protective shield
Type
Indoor
Power Consumption
6 W
Luminous Flux
900 @ 5700 K (Lm)
Color Rendering Index
> 80 Ra
Power Factor PF
> 0.97
Operating Temperature
-30˚C ~ +50˚C
IP
53
Color Temperature CCT
3K /4K/5.7K
Operating Voltage
200-240 V AC, 50/60 Hz
Dimension
100 X 100 X 42 (mm)
Spot 3Q