![background image](http://html.mh-extra.com/html/a-collection/aflood-tec/aflood-tec_mounting-instructions_446702001.webp)
Maximum projected area of the floodlight:
12W: 0.024m
2
24W: 0.037m
2
48W: 0,083m
2
72W: 0.083m
2
120W: 0.136m
2
150W: 0,136m
2
200W: 0.136m
2
Dimension of Tempered Glass:
12W: 165x128x4 (mm)
24W: 213x163x4 (mm)
48W DLS: 320x242x4 (mm)
72W: 320x242x4 (mm)
120W: 390x332x5 (mm)
150W: 390x332x5 (mm)
200W: 390x332x5 (mm)
*aFlood LED Tec Symmetric DLS model
When the light level drops below 25 lux, the floodlight automatically
turns on, turning off again when the light level rises about 75 lux.
Mounting Instructions
Floodlight aFlood tec
Dimensions
Unit: mm
Mounting
Step 1: Open the packaging and examine the fixture. If the fixture
is damaged, please contact the distributor.
Step 2: Mount the fixture's bracket to a wall or clamp.
Step 3: Adjust the fixture's position and angle the light in the
desired direction before tightening the screws on the side
of the fixture.
Step 4: Make sure the cables are connected correctly.
Brown - Line Blue - Neutral Yellow/Green - Earth
Safety Message:
• Electrical installations should only be carried out by a licensed electrician.
• Switch off the power to the fixture and wait until it has cooled down before disassembling.
• In the event of faults, the power to the fixture must be switched off immediately.
Do not attempt to repair the fixture yourself.
Contact your Ahlsell retailer to replace the fixture.
• The mininum distance from lighted objects
to luminaries shall be kept at least 0.3m
Output
H1
H2
L1
L2
T
D1
D2
W1
W2
R
Ø
12W
175
205
135
150
42
31
8
20
8.5
4.25
8.5
24W
220
251
170
200
45
35
9
30
10.5
5.25
10.5
48W
290
330
225
243
55
40
9
35
11
5.5
12.5
48W DLS
330
372
250
265
75
40
9
40
11
5.5
12.5
72W
330
372
250
265
75
40
9
40
11
5.5
12.5
120W
400
450
340
360
90
55
20
55
13
6.5
13
150W
400
450
340
360
90
55
20
55
13
6,5
13
200W
400
450
340
360
90
55
20
55
13
6.5
13
ENGLISH