OPERATION
DLV1280 DX
User’s Manual
3-9
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. See 2.10. Keypad Protocols and
Conversion, and 3.7, Configuring System Parameters.
Pixel
Press
Pixel
to access the pixel tracking and pixel phase double slidebar. Adjust pixel
tracking first: use
and
to increase or decrease the frequency of the pixel
sampling clock to correct consistency and/or aspect ration of the image. For proper
phase, use
ON
and
OFF
to increase or decrease pixel phase so that any shimmer
disappears and the image is stable throughout. See 3.6, Adjusting the Image (Size and
Position subsection) for a complete explanation of tracking and phase.
Position
Press
Position
to move the image using the double slidebar. At the slidebar, use
and
to move the image left or right, use
ON
and
OFF
to move the image up or
down.
Lens
Remote lens features are not available in this projector. Adjust the lens manually for
proper focus and (if applicable) zoom. Offsets can also be mechanically adjusted. See
Section 2.
Shutter
(OPTIONAL)
If your projector has a mechanical lens shutter (a.k.a. douser) installed, press and
hold
Shutter*
for approximately 1 second to toggle the shutter closed or open with a
single key press (this also blanks the image electronically). Or quickly press and
release
Shutter*
and follow immediately with
ON
or
OFF
if you want to guarantee the
correct toggle (useful if you are unsure of the present status). Close the shutter
whenever you want to mute all display yet maintain access to projector functions.
Open the shutter to regain the display. With no shutter installed,
Shutter*
still blanks the
image electronically, but the blanking is not quite as black.
NOTES: 1) Upon power-up, the shutter is open. 2) The lamp remains on regardless
of shutter status.
Mute
Use
Mute*
to mute (hide) the current menu—press and hold for approximately 1
second to toggle the menu on or off with a single key press. Or quickly press and
release
Mute*
and follow immediately with
ON
or
OFF
if you want to guarantee the
correct toggle (useful if you are unsure of the present status).
Function Key
From presentation level, press
Func
followed by a 2-digit number to enable a specific
color or colors in the display. For example,
Func
will display only red and green
data,
Func
will display all colors data. The list of available color combinations is
shown below and also appears on the back of the IR remote keypad. Color enabling
can also be accessed through the menu system rather than these shortcuts.
Pixel
Position
Lens
Shutter*
Mute*
Func
Summary of Contents for DLV1280 DX
