Christie DLV1280 DX, User Manual

Page: 87 / 143

OPERATION
3-54
DLV1280 DX User’s Manual
3d) ADJUST NEXT
PRIMARY:
When all
greens match,
select Next
Primary from
the Green
Primary menu.
The Blue
Primary menu
will appear and
your screens will turn to a full blue field. Repeat steps 3b and 3c for blue, then
for red. For each primary adjustment, add other “secondary” colors as
necessary.
3e) RECHECK ALL COLORS:
Because one color may be slightly affected by
settings used for another, recheck all 3 colors to make sure your initial
matching is still good. Adjust if necessary.
NOTE: If desired, use Func
for full red field,
Func
for green, and
Func for blue.
3f) ADJUST WHITES:
Exit to the main Adjust Primary Colors (CSC) menu to view
all white fields once more. If necessary, adjust white levels slightly to match
all white fields.
You have now completed the color matching of all screens. On each projector, the
settings define your chosen User color temperature (see Step 2b). For best results, set
Lamp Mode to Intensity on all projectors—light output from each will be maintained
over time to within 10% of the current level. Then proceed to the Achieving
Brightness Uniformity procedure provided below.
Applying the Primary Color Adjustments For New Sources
For any new sources that you may use, keep in mind the following:
‰
“User 1” is the default color temperature for all sources as long as the
Use Primary Color Adjustment checkbox remains checked in the Adjust
Primary Colors (CSC) menu.
‰
6500K is the default color temperature if you adjusted primary colors
for User 2, 3 or 4 (see Step 2b in Matching Colors In Multiple Screens),
regardless of the Use Primary Color Adjustment checkbox status. To
switch to your primary color adjustments, select the proper User color
temperature as usual from any color temperature menu. Make sure that
the Use Primary Color Adjustment checkbox is checked.
‰ 6500K is the default color temperature if the Use Primary Color
Adjustment checkbox is unchecked, regardless of which “User” color
temperature you chose in Step 2b.
Canceling A Primary Color Adjustment
If you do not want to use primary color adjustments, delete the Use Primary Color
Adjustment checkmark in the Adjust Primary Color (CSC) menu. This disables Red
Primary, Green Primary and Blue Primary controls (and they will appear “grayed
out” in the menu). In addition, the Gamma setting can now be changed if desired.
All Projectors