Rotational Vacuum Concentrator RVC 2-33 CDplus
with infrared heating
6 Operation
Version 08/2009, Rev. 3.6 of 22/11/2021
• sb-bs
61 / 105
Translation of the original operating manual
Timer Warm-up
You can set a warm-up time between 5 and 99 minutes.
Temperature Warm-up
During the warm-up phase, the rotor temperature is set to the set
temperature.
Click at button push
If this function is activated, a brief sound signal can be heard whenever a
key is pressed.
High temperature resolution
Temperatures are displayed in the values window with a resolution of
1
/
10
°C, normally with a resolution of 1°C.
Rotor speed
The rotor speed can be set in a range between 100 rpm and 1,750 rpm.
NOTE
We guarantee that a speed of 1,350 rpm can be reached with all of the
available rotors. Higher speeds are possible in individual cases.
Continuous operation coldtrap (only if a cold trap is installed) and
Continuous operation VP
If these options are set to "yes", the vacuum pump and the cold trap will not
be switched off after the evaporation. Instead, they will remain active. This
is useful if several evaporation processes are started in succession.
Service menu
Fig. 46: Service menu
Rotor information
This function is not supported by this type of unit.
