Rotational Vacuum Concentrator RVC 2-33 CDplus
with infrared heating
4 Storage and transport
34 / 105
Version 08/2009, Rev. 3.6 of 22/11/2021
• sb-bs
Translation of the original operating manual
Pos : 99 / 200 C hrist/ 371 R VC-BA ( PROJ EKT E)/R VC 2-33 CD plus IR/ 040 Lagerung und Tr ansport/ 040- 0040 Tr ansportsic herung RVC 2-33 IR @ 31\m od_1407484047030_68.docx @ 208985 @ 2 @ 1
→
4.4
Transport safety device
The following transport safety devices must be removed prior to start-up:
• The polystyrene element that covers the valve block at the back of the
RVC must be removed.
• Remove the layers of paper between the lid and rotor chamber; they
prevent the lid from getting stuck during the transport.
Pos : 100 /010 Univ ers almodul e/ Leerz eile @ 0\mod_1202116244500_0.docx @ 114 @ @ 1
Pos : 101 /200 Chris t/371 R VC-BA (PR OJEKT E)/RVC 2- 33 CDpl us IR/ 040 Lag erung und Trans por t/040-0050 I nner betrieblicher Trans port RVC 2- 33 IR @ 31\mod_1407484047294_68. doc x @ 208999 @ 2 @ 1
→
4.5
On-site transport
• When lifting the RVC, always reach under it from the side. Do not grab
the unit at the plastic control panel (see the illustrations below).
CAUTION
The rotational vacuum concentrator
RVC 2-33
CDplus with infrared
heating
weighs approx. 49 kg!
correct
incorrect
Fig. 5: Lifting the RVC
• When setting the unit down, ensure that the feet are upright (see the
illustrations below).
correct
incorrect
Fig. 6: Unit feet
• Use suitable packaging for the transport, and if at all possible, the
original packaging.
Pos : 102 /010 Univ ers almodul e/ Abs chnitt swec hs el @ 0\mod_1202124514062_0. docx @ 418 @ @ 1
Pos : 103 /010 Univ ers almodul e/ Seit enwechs el @ 0\mod_1202116244312_0.docx @ 105 @ @ 1
