Chevrolet 2008 Malibu Owner'S Manual Download Page 301

Page: 301 / 412

5. Push the license plate lamp in and turn it through

the fascia opening.

6. Turn the two screws that hold the license plate

lamp clockwise to reinstall.

Replacement Bulbs

Exterior Lamp

Bulb Number

Back-up Lamp and Taillamp

921

License Plate Lamp

168

Turn Signal Lamp

3156

For replacement bulbs not listed here, contact your
dealer/retailer.

Windshield Wiper Blade
Replacement

Inspect the windshield wiper blades for wear or cracking.
See Scheduled Maintenance on page 6-4.

To remove the wiper blade:

1. Pull the windshield wiper arm connector away from

the windshield.

2. Push the release button.

3. Slide the blade forward.

4. Turn the blade toward you and continue to slide

forward.

5. Install the new blade onto the arm connector and

make sure the grooved areas are fully set in the
locked position.

For the proper type and size, see Maintenance
Replacement Parts on page 6-13.

5-51

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands

Chevrolet 2008 Malibu, Owner'S Manual

Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands