Chevrolet 2008 Malibu Owner'S Manual Download Page 297

Page: 297 / 412

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (–) Terminal

B. Good Battery or Remote Positive (+) and Remote

Negative (–) Terminals

C. Dead Battery or Remote Positive (+) Terminal

To disconnect the jumper cables from both vehicles,
do the following:

1. Disconnect the black negative (

−

) cable from the

vehicle that had the dead battery.

2. Disconnect the black negative (

−

) cable from the

vehicle with the good battery.

3. Disconnect the red positive (+) cable from the

vehicle with the good battery.

4. Disconnect the red positive (+) cable from the other

vehicle.

5. Return the caps over the positive (+) and

negative (–) terminals to their original positions.

Jumper Cable Removal

5-47

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Search results

Summary of Contents for 2008 Malibu

Reviews:

Chevrolet 2008 Malibu, Owner'S Manual, Page: 297 / 412

Search results

Summary of Contents for 2008 Malibu

Reviews: