Chevrolet 2008 Malibu Owner'S Manual Download Page 243

Page: 243 / 412

Dolly Towing

Tow the vehicle with the two rear wheels on the ground
and the front wheels on a dolly:

Do not tow the vehicle with the rear wheels on a dolly.

To tow the vehicle with two wheels on the ground and
a dolly:

1. Put the front wheels on a dolly.

2. Put the gear shift lever in P (Park).

3. Set the parking brake.

4. Clamp the steering wheel in a straight-ahead

position with a clamping device designed for towing.

5. Remove the key from the ignition.

6. Secure the vehicle to the dolly.

7. Release the parking brake.

4-29

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands

Chevrolet 2008 Malibu, Owner'S Manual

Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands