Chevrolet 2008 Malibu Owner'S Manual Download Page 267

Page: 267 / 412

A. Engine Air Cleaner/Filter. See Engine Air

Cleaner/Filter on page 5-24.

B. Power Steering Fluid Reservoir. See Power Steering

Fluid on page 5-36.

C. Engine Oil Fill Cap. See “When to Add Engine Oil”

under Engine Oil on page 5-19.

D. Engine Oil Dipstick. See “Checking Engine Oil”

under Engine Oil on page 5-19.

E. Engine Coolant Surge Tank. See Engine Coolant on

page 5-26.

F. Pressure Cap. See Pressure Cap on page 5-29.

G. Brake Master Cylinder Reservoir. See “Brake Fluid”

under Brakes on page 5-39.

H. Battery. See Battery on page 5-42.

I. Engine Compartment Fuse Block. See Engine

Compartment Fuse Block on page 5-102.

J. Windshield Washer Fluid Reservoir. See “Adding

Washer Fluid” under Windshield Washer Fluid
on page 5-38.

5-17

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands

Chevrolet 2008 Malibu, Owner'S Manual

Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands