manualshive.com logo in svg

Chevrolet 2008 Malibu, Owner'S Manual, Page: 33 / 412

Share
Download
Chevrolet 2008 Malibu Owner'S Manual Download Page 33

3. Be sure that the belt is not twisted and it lies flat.

The elastic cord must be under the belt and the
guide on top.

{

CAUTION:

A safety belt that is not properly worn may not
provide the protection needed in a crash. The
person wearing the belt could be seriously

CAUTION:

(Continued)

CAUTION:

(Continued)

injured. The shoulder belt should go over the
shoulder and across the chest. These parts of
the body are best able to take belt restraining
forces.

4. Buckle, position, and release the safety belt as

described previously in this section. Make sure
that the shoulder belt crosses the shoulder.

1-29

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Reviews:

No comments