Chevrolet 2008 Malibu, Owner'S Manual

Page: 197 / 412

Finding a Station
BAND: Press to switch between FM1, FM2, AM, or
XM™ (if equipped). The selection displays.
f
(Tune): Turn to select radio stations.
©
SEEK
¨
: Press the arrows to go to the previous or
the next station and stay there.
To scan stations, press and hold either arrow for a
few seconds until the radio beeps once. The radio goes
to a station, plays for a few seconds, then goes to
the next station. Press either arrow again to stop
scanning.
The radio seeks and scans stations only with a strong
signal that are in the selected band.
To scan presets within the current selected band by
pressing and holding either seek arrow for four seconds
until a double beep sounds. The radio goes to a stored
preset, plays for a few seconds if a strong signal is
present, then goes to the next stored preset. The station
frequency flashes while the radio is in the scan mode.
4
(Information): Press to switch the display between
the radio station frequency and the time. While the
ignition is off, press this button to display the time.
4
(Information) (With XM™ Satellite Radio Service,
MP3, and RDS Features): Press this button to
display additional text information related to the current
FM-RDS or XM™ station, or MP3 song. A choice of
additional information such as: Channel, Song, Artist,
and CAT (category) can appear. Continue pressing this
button to highlight the desired label, or press the
pushbutton positioned under any one of the labels and
the information about that label displays.
While information is not available, No Info displays.
Storing a Radio Station as a Favorite
Drivers are encouraged to set up their radio station
favorites while the vehicle is in PARK (P). Tune to your
favorite stations using the presets, favorites button,
and steering wheel controls if the vehicle has this
feature. See Defensive Driving on page 4-2.
3-65