Chevrolet 2008 Malibu Owner'S Manual Download Page 329

Page: 329 / 412

Removing the Spare Tire and Tools

The equipment you will need is in the trunk.

1. Open the trunk. See Trunk on page 2-13 for more

information.

2. Remove the spare tire cover.

3. Turn the wing nut counterclockwise and remove it.

Then remove the compact spare tire. See Compact
Spare Tire on page 5-88 for more information.

4. Remove the wing nut holding the jack in place.

5. Remove the jack and wheel wrench from the trunk.

Tire Changing Tools

The tools you will be using include the wheel wrench (A)
and jack (B).

5-79

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Search results

Summary of Contents for 2008 Malibu

Reviews:

Chevrolet 2008 Malibu, Owner'S Manual, Page: 329 / 412

Search results

Summary of Contents for 2008 Malibu

Reviews: