Chevrolet 2008 Malibu Owner'S Manual Download Page 9

Page: 9 / 412

On seats with manual reclining seatbacks, the lever
used to operate them is located on the outboard side of
the seat.

To recline the seatback:

1. Lift the recline lever.

2. Move the seatback to the desired position, then

release the lever to lock the seatback in place.

3. Push and pull on the seatback to make sure it is

locked.

To return the seatback to an upright position:

1. Lift the lever fully without applying pressure to the

seatback and the seatback returns to the upright
position.

2. Release the lever to lock the seatback.

3. Push and pull on the seatback to make sure it is

locked.

1-5

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands

Chevrolet 2008 Malibu, Owner'S Manual

Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands