Chevrolet 2008 Malibu Owner'S Manual Download Page 202 | Manualshive

Page: 202 / 412

background image

Care of Your CDs

If playing a CD, the sound quality can be reduced due
to CD quality, the method of recording, the quality of the
music that has been recorded, and the way the CD
has been handled. Handle them carefully. Store CD(s)
in their original cases or other protective cases and
away from direct sunlight and dust. The CD player scans
the bottom surface of the disc. If the surface of a CD
is damaged, such as cracked, broken, or scratched, the
CD does not play properly or not at all. Do not touch
the bottom side of a CD while handling it; this could
damage the surface. Pick up CDs by grasping the outer
edges or the edge of the hole and the outer edge.

If the surface of a CD is soiled, take a soft, lint free cloth
or dampen a clean, soft cloth in a mild, neutral detergent
solution mixed with water, and clean it. Make sure the
wiping process starts from the center to the edge.

Care of Your CD Player

Do not add any label to a CD, it could get caught in the
CD player. If a CD is recorded on a personal computer
and a description label is needed, try labeling the top of
the recorded CD with a marking pen.

The use of CD lens cleaners for CDs is not advised,
due to the risk of contaminating the lens of the CD optics
with lubricants internal to the CD player mechanism.

Notice: If a label is added to a CD, or more than one
CD is inserted into the slot at a time, or an attempt
is made to play scratched or damaged CDs, the
CD player could be damaged. While using the
CD player, use only CDs in good condition without
any label, load one CD at a time, and keep the
CD player and the loading slot free of foreign
materials, liquids, and debris.

If an error displays, see “CD Messages” later in this
section.

For vehicles that have a radio with a Six-Disc CD
player, see the following:

LOAD

^

: Press to load CDs into the CD player.

This CD player holds up to six CDs.

To insert one CD, do the following:

1. Press and release the

^

button.

2. Wait for the message to insert the disc.

3. Load a CD. Insert the CD partway into the slot,

label side up. The player pulls the CD in.

3-70

«
...
200
201
202
203
204
...
»

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Malibu

Brand: Kargo Master Pages: 5

Brand: Back View Pages: 168

Brand: Jeep Pages: 212

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

Brand: RAM Pages: 292

Brand: RAM Pages: 116

CommCenter D1 Series

Brand: Federal Signal Corporation Pages: 16

Brand: Allen Sports Pages: 2

Brand: Mazda Pages: 13

MCL-7000 Series

Brand: Dakota Digital Pages: 2

Brand: Volvo Pages: 284

Brand: Draw tite Pages: 4

Brand: Mercedes-Benz Pages: 329

Brand: JKS Pages: 3

Brand: Hyundai Pages: 11

Brand: Brodit Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands