Chevrolet 2008 Malibu Owner'S Manual Download Page 303 | Manualshive

Page: 303 / 412

background image

Low-Profile Performance Tire

If your vehicle has P225/50R18 or P225/50R17
size tires, they are classified as low-profile
performance tires. These tires are designed for
very responsive driving on wet or dry pavement.
You may also notice more road noise with
low-profile performance tires and that they
tend to wear faster.

Notice: If the vehicle has low-profile tires,
they are more susceptible to damage from
road hazards or curb impact than standard
profile tires. Tire and/or wheel assembly
damage can occur when coming into contact
with road hazards like, potholes, or sharp
edged objects, or when sliding into a curb.
The vehicle warranty does not cover this
type of damage. Keep tires set to the correct
inflation pressure and, when possible avoid
contact with curbs, potholes, and other road
hazards.

Winter Tires

If you expect to drive on snow or ice covered roads
often, you may want to get winter tires for your vehicle.
All season tires provide good overall performance on
most surfaces but they may not offer the traction
you would like or the same level of performance
as winter tires on snow or ice covered roads.

Winter tires, in general, are designed for increased
traction on snow and ice covered roads. With winter tires,
there may be decreased dry road traction, increased road
noise, and shorter tread life. After switching to winter
tires, be alert for changes in vehicle handling and braking.

See your dealer/retailer for details regarding winter tire
availability and proper tire selection. Also, see Buying
New Tires on page 5-70.

If you choose to use winter tires:

•

Use tires of the same brand and tread type on all
four wheel positions.

•

Use only radial ply tires of the same size, load range,
and speed rating as the original equipment tires.

Winter tires with the same speed rating as your original
equipment tires may not be available for H, V, W, Y,
and ZR speed rated tires. If you choose winter tires with
a lower speed rating, never exceed the tire’s maximum
speed capability.

5-53

«
...
301
302
303
304
305
...
»

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2008 Malibu

Brand: OEM Tools Pages: 4

Brand: minnid Pages: 44

Brand: Porsche Pages: 313

Brand: Mobileye Pages: 29

Multi Vehicle Mount MVM-35-05

Brand: Bracketron Pages: 4

2001 Accord Sedan

Brand: Honda Pages: 372

Brand: Imiola HAK-POL Pages: 3

Brand: Cadillac Pages: 339

Brand: ULTIMATE SPEED Pages: 18

Brand: Honda Pages: 219

XEV1R22T2 Series

Brand: hager Pages: 14

Brand: Hyundai Pages: 560

Brand: ACV Pages: 2

Brand: Hotchkis Pages: 28

Brand: Toyota Pages: 176

Brand: Edscha Trailer Systems Pages: 120

Automobile Parts

Brand: S&S Cycle Pages: 8

Brand: Lund Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands