manualshive.com logo in svg

Chevrolet 2008 Malibu, Owner'S Manual, Page: 14 / 412

Share
Download
Chevrolet 2008 Malibu Owner'S Manual Download Page 14

To raise the rear seatback pull the seatback up and
make sure it latches. Push and pull on the seatback to
be sure it is locked in position. Make sure that the
safety belts are properly stowed over the seatback in all
three positions.

{

CAUTION:

A safety belt that is improperly routed, not
properly attached, or twisted will not provide
the protection needed in a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that the safety belts are properly
routed and attached, and are not twisted.

{

CAUTION:

If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.

When the seat is not in use, it should be kept in the
upright locked position.

1-10

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Reviews:

No comments