Chevrolet 2008 Malibu Owner'S Manual Download Page 138

Page: 138 / 412

Hazard Warning Flashers

The hazard warning flashers let you warn the police and
others that you have a problem. The front and rear
turn signal lamps will flash on and off.

The hazard warning
flasher button is on the
instrument panel.

Press the button to make the front and rear turn signal
lamps flash on and off. Press again to turn the
flashers completely off.

The hazard warning flashers work even if the key is not
in the ignition switch.

Other Warning Devices

If you carry reflective triangles, you can set them up at
the side of the road about 300 feet (100 m) behind
your vehicle.

Horn

Press near or on the horn symbols on the steering
wheel pad to sound the horn.

3-6

Summary of Contents for 2008 Malibu





























































































































































































































































































































































































































Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands

Chevrolet 2008 Malibu, Owner'S Manual

Search results

Summary of Contents for 2008 Malibu

Reviews:

Related manuals for 2008 Malibu

Brands by name

Popular brands