ChargePoint® Charging Stations
4-4
Step 6: Attach the Station Covers
Follow these steps for each station:
1.
Attach the wire covers:
•
Place the wire cover over the exposed wiring on the terminal
block.
•
Using a coin, lock the wire cover in place, as shown.
NOTE:
To avoid damage, do not use a screwdriver.
2.
Place the cover over the front of the station.
3.
Fasten the front covers by inserting two T10 Torx screws into the
bottom of the station, as shown.
T10 Torx screws (2)
