Install Bracket and CMK
3-7
3.3 Dual Station (no Cord Management)
1.
Slide the bottom bracket brace over the pedestal, allowing
it to drop to the bottom.
2.
Remove the ground lug using a 7/16” wrench (save the
1/4”x20 screws to reinstall).
3.
Connect the ground wire from the service wiring to the
ground lug, then run two 10-gauge ground wires from the
ground lug through the wiring opening in front of the
pedestal.
4.
Reinstall the ground lug to the pedestal using the 7/16”
wrench and the two 1/4”x20 screws you removed.
5.
Run the remaining service wiring through the opening in
front of the pedestal.
If installing the Power Share kit, follow the steps in Appendix B before continuing with the next
step.
STOP!
