ChargePoint CPF25 Installation Manual Download Page 46

E

-1

Limited Product Warranty

                                  

E

This CPF25 Limited Product Warranty applies to you, a customer who has purchased CHARGEPOINT’s CPF25 Charging Stations 
(the “Product”) from CHARGEPOINT, INC., or one of its authorized distributors and not for resale.

LIMITED ONE-YEAR WARRANTY: Subject to the exclusions from warranty coverage set forth below, CHARGEPOINT warrants that 
the Product will be free from any defects in materials and/or workmanship (the “Limited Warranty”) for a period of one (1) year 
after the date of the initial installation of the Product (the “One-Year Warranty Period”). If the Product becomes defective in 
breach of the Limited Warranty, CHARGEPOINT will, upon written notice of the defect received during the One-Year Warranty 
period, either repair or replace, at ChargePoint’s election, the Product if it proves to be defective; provided, that CHARGEPOINT 
will not be responsible for the cost of any labor associated with the repair or replacement of any defective Product. If Customer 
has acquired the Product and has executed a multi-family ChargePoint Electric Vehicle Charging Services Agreement, the 
effective time period for the Limited Warranty is pursuant to that agreement.

TWO-, THREE-, FOUR- OR FIVE-YEAR EXTENDED WARRANTY (Additional Charge Applies): Subject to the exclusions from 
warranty coverage set forth below, if you have purchased an extended warranty, and if the Product becomes defective in breach 
of the Limited Warranty above at any time during the extended warranty period after the date of the initial installation of the 
Product, CHARGEPOINT will, upon written notice of the defect received during the extended warranty period, either repair, 
provide replacement parts for the defective parts of the Product or replace the Product, at ChargePoint’s election, if it proves to 
be defective; provided, that CHARGEPOINT will not be responsible for the cost of any labor associated with the repair or 
replacement of any defective Product.

CHARGEPOINT’s Options: You acknowledge that replacement products provided by CHARGEPOINT under each of the Limited 
Warranty and the Extended Warranty may be re-manufactured or reconditioned Products or, if the exact Product is no longer 
manufactured by CHARGEPOINT, a Product with substantially similar functionality (“Replacement Products”). Any Replacement 
Products so furnished will be warranted for the remainder of the original Warranty Period or ninety (90) days from the date of 
delivery of such Replacement Product, whichever is greater. Should CHARGEPOINT be unable to repair or replace the Product, 
CHARGEPOINT will refund the purchase price of the Product.

EXCLUSIONS FROM LIMITED WARRANTY AND EXTENDED WARRANTY

IMPORTANT: 

The Limited Warranty and, if purchased, the Extended Warranty, on your Product shall not apply to defects, or 

service repairs, resulting from any of the following:

Alteration or modification of the Product in any way not approved in writing by CHARGEPOINT.

Vandalism.

Abuse, damage or otherwise being subjected to problems caused by negligence (including but not limited to physical 
damage from being struck by a vehicle) or misapplication, or use of the Products other than as specified in the applicable 
CHARGEPOINT documentation.

Installation or relocation of the Products unless performed by CHARGEPOINT or by a ChargePoint authorized installer or 
service provider.

Improper site preparation or maintenance.

Damage as a result of accidents, extreme power surge, extreme electromagnetic field, acts of nature or other causes 
beyond the control of CHARGEPOINT.

Use of the Product with software, interfacing, parts or supplies not supplied by CHARGEPOINT.

You are responsible for the proper installation and maintenance of the Product. Any service or repairs beyond the scope of the 
Limited Warranty or the Extended Warranty above are subject to CHARGEPOINT’s then prevailing current labor rates and other 
applicable charges.

Third Party Products. The Limited Warranty and Extended Warranty are exclusive of products manufactured by third parties 
(“Third Party Products”). If such third party manufacturer provides a separate warranty with respect to the Third Party Product, 
CHARGEPOINT will include such warranty in the packaging of the CHARGEPOINT Product. 

Summary of Contents for CPF25



















































Reviews: