ChargePoint® Charging Stations
1-2
Check Shipping Boxes for Correct Contents
Main Unit
Each main charging unit (one or two, depending on
whether you ordered a single or dual station model) ships
in a box containing:
•
Station (1)
•
Cover (1)
•
Mounting Skirt(1)
•
Wire Cover (1)
•
3/16” Drill Bit (1)*
•
1/4” X 2” Lag Screws (3)*
•
Driver Bit (1)
•
1/4”-20 x 3/4” Hex Bolts (2)
•
1/4”-20 x 3/8” Phillips Screw (1)
•
T10 Torx Screws (2)
•
Spare Activation Label (1). A duplicate label is
attached to the inside of the main unit. KEEP this
spare label because it contains important information
that is needed to activate the station on ChargePoint
(Section 5).
*Not used in pedestal mount installations. These can be
discarded.
Charging Cord
Each charging cord (one or two, depending on whether
you ordered a single or dual station model) ships in a
separate box. If you ordered the Cord Management Kit
(CMK), the cord(s) includes integrated clamps.
Clamp attached if
you ordered a
Cord Management
Kit (CMK)
