ChargePoint® Charging Stations
6-2
Charging Cable Doesn’t Move Freely
If your CPF25 is equipped with a Cord Management Kit and the charging cord does not extend or retract fully and
smoothly, it is likely that it’s rope has come off the pulley and you must re-position it.
You will need:
T25 L-wrench
Follow these steps:
1.
Using the T25 L-wrench, loosen the set screws on
each side of the retractor below the top cap.
2.
Each rope is attached to a weight that sits on a shelf.
Pull the weight shelf up by pulling the rope located in
the middle of the top cap.
