Challenger Lifts CLM16, Installation, Operation And Maintenance Manual

Page: 17 / 57

Installing the Power Supply Unit
Attach the power supply unit (P)
to the left side of the control
unit (C) to ensure easy access to
the main switch.
Main Switch
The main switch can also be used as an Emergency Stop switch. Turn to position 0.
Position 1: Lift is ready for operation.
Position 0: Lift is disconnected from mains supply. In this position
the switch can be padlocked.
NOTE:
After turning the unit ON, wait approx. 3 seconds until the control
has performed a self-test.
The lift is now in automatic mode. (A)
CLM16 IOM.
DOC
5/8/09