Challenger Lifts CLM16, Installation, Operation And Maintenance Manual

Page: 34 / 57

Adjusting the Bottom Stop:
The bottom-stop angle (1) is mounted to a rail (3) in the lower part of the column.
To adjust the stopping point release the slider block clamp (2, 5) by opening the screw (4). Position the
bottom-stop angle as required.
Ensure that carriage stops BEFORE it makes contact with the base! Non-compliance could
result in damage of lift components!
CLM16 IOM.
DOC
5/8/09
Item Description
1 Bottom-Stop Angle
2 Slider Block Clamp, Inside Part
3 Mounting Rail
4 Countersunk Screw M6x12 DIN 7991
5 Slider Block Clamp, Outside Part