Challenger Lifts CLM16, Installation, Operation And Maintenance Manual

Page: 28 / 57

Maintenance
CLM16 IOM.
DOC
5/8/09
WARNING
Turn off the main switch before performing any maintenance, repair or setup work,
and protect it against unauthorized usage. (Lock-out / Tag-out) !!!
DO NOT SERVICE THE ELECTRICAL PORTION OF THE LIFT AT ANY TIME
WITHOUT PRIOR AUTHORIZATION FROM CHALLENGER LIFTS, INC. !!! PLEASE
REFER TO THE MAINTENANCE INSTRUCTIONS FOR THE PROPER LOCKOUT /
TAGOUT PROCEDURE !!! FOR MORE INFORMATION REFER TO THE LOCKOUT /
TAGOUT PROCEDURE IN THE MAINTENANCE INSTRUCTIONS AND ANSI Z244.1
!!!
Annual Inspection
Once annually have your lift inspected by a trained service technician.
Maintenance by the Operator
Establish a periodic
routine
maintenance procedure to ensure trouble free operation and long service
life.
Servicing of safety devices and electrical equipment by authorized and trained personnel only.
Re-circulating Ball Nut
Grease the re-circulating ball nut with 4 to 7 strokes from a grease gun at least every six months.
Use commercial antifriction-bearing grease.
To make the grease fitting (A) accessible, remove screws (1 and 3). Then remove cover plate (4)
and fastener of rubber cover (2).
Fold down the rubber cover.