Challenger Lifts CLM16, Installation, Operation And Maintenance Manual

Page: 8 / 57

CLM16 IOM.
DOC
5/8/09
O
WNER
/E
MPLOYER
R
ESPONSIBILITIES
5B
Lift Operator Qualifications and Training
The owner/employer shall ensure that all lift operators have the appropriate qualifications and that they
are trained in the safe operation of the lift by making use of the following materials: manufacturer
supplied operation & maintenance manual; ALI/SM 93-1, ALI Lifting It Right safety manual; ALI/ST 90
Safety Tips card; ANSI/ALI ALOIM-1994, American National Standard for Automotive Lifts – Safety
Requirements for Operation, Inspection and Maintenance; ALI/WL series, ALI Uniform Warning Label
Decals/Placards; and, if required, ALI/LP-Guide, Vehicle Lifting Points/Quick Reference Guide for Frame
Engaging Lifts.
Operator training shall be appropriately documented in accordance with ANSI/ALI ALOIM-1994.
26B
Display of Information Materials
The owner/employer shall display the following information materials in a conspicuous location in the lift
area: manufacturer supplied operation & maintenance manual; ALI/SM 93-1, ALI Lifting It Right safety
manual; ALI/ST 90 Safety Tips card; ANSI/ALI ALOIM-1994, American National Standard for
Automotive Lifts – Safety Requirements for Operation, Inspection and Maintenance; ALI/WL series, ALI
Uniform Warning Label Decals/Placards; and, if required, ALI/LP-Guide, Vehicle Lifting Points/Quick
Reference Guide for Frame Engaging Lifts and ANSI/SAE J2184-May2000, Vehicle Lift Points for
Service Garage Lifting.
27B
Periodic Inspection
The owner/employer shall establish a periodic inspection procedure in accordance with the lift
manufacturer's recommendations or ANSI/ALI ALOIM-1994.
The owner/employer shall ensure that all lift inspectors have the appropriate qualifications and that they
are trained in the inspection of the lift.
Periodic inspections shall be appropriately documented in accordance with the manufacturer's
recommendations or ANSI/ALI ALOIM-1994.
28B
Periodic Routine Maintenance
The owner/employer shall establish a routine maintenance procedure in accordance with the lift
manufacturer's recommendations or ANSI/ALI ALOIM-1994.
The owner/employer shall ensure that all routine maintenance personnel have the appropriate
qualifications and that they are trained in the routine maintenance of the lift.
Periodic routine maintenance shall be appropriately documented in accordance with the manufacturer's
recommendations or ANSI/ALI ALOIM-1994.
29B
Repair Maintenance
The owner/employer shall perform repair maintenance procedures whenever considered necessary by
lift operator, lift inspector or routine maintenance personnel. Repair maintenance shall be performed in
accordance with the lift manufacturer's recommendations or ANSI/ALI ALOIM-1994.
The owner/employer shall ensure that all repair maintenance personnel have the appropriate
qualifications and that they are trained in the repair maintenance of the lift.
Repair maintenance shall be appropriately documented in accordance with the manufacturer's
recommendations or ANSI/ALI ALOIM-1994.
The owner/employer shall provide appropriate lockout/tagout means for all energy sources in
accordance with ANSI Z 244.1-1982 (R 1993), Safety Requirements for the Lockout/Tagout of Energy
Sources. This shall be done before any repair work is performed.
30B
Modifications
The owner shall not modify or reconstruct any lift without the manufacturer's express written consent.