Challenger Lifts CLM16, Installation, Operation And Maintenance Manual

Page: 12 / 57

Installation
Handling / Location
CAUTION
Make sure the columns are lifted
properly by the structure and NOT by the
carriage.
Make sure all items in use to lift the
column are rated for at least the weight
shown in the specifications.
Screw an eye bolt M16 into the threaded hole
on top of the motor plate of the column. Insert
a chain or strap through the eye and lift the
column using a hoist or forklift.
CAUTION
Lift installation by qualified personnel only.
IMPORTANT NOTE:
Lift may be used for both indoor and outdoor applications!
ATTENTION
Floor Slope
Ensure that area where columns are installed/used the floor does not slope more than two (2)
degrees in any given direction !!!
ATTENTION
Important Information
For further installation information, please refer to ANSI/ALI ALIS, Safety Requirements for
Installation and Service of Automotive Lifts !!!
CLM16 IOM.
DOC
5/8/09